Online Access Free HPE0-S56 Exam Questions

While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the current and backup system ROMs are corrupt.
What should be the next step to fix the server?

• A.Replace the system board
• B.Restore the system firmware from the iLO repository
• C.Restore the system firmware from a USB drive
• D.Replace the CMOS battery
• E.Restore the system firmware from a UEFI shell prompt

You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?

• A.Audit
• B.IML
• C.System
• D.iLO

Match the Networking Product Family to the appropriate use case:

Correct Answer:

You are troubleshooting a customer's HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.
What should you do?

• A.Use the internal USB 3.0 connector.
• B.Set the USB 3.0 mode to Auto.
• C.Set the USB 3.0 mode to Enabled.
• D.Use the front-facing USB 3.0 connector.

You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels?

• A.On a single-CPU server, install the first memory DIMM in channel one, the second in channel two, the third in channel three, and so on
• B.Install memory DIMMs of different speeds and sizes in pairs in adjoining sockets on the same memory data bus
• C.For the best reliability, install DIMMs of different speeds and sizes in a single memory channel
• D.To maximize performance, balance the total memory capacity across all installed processors, and load the channels similarly