A.A server profile can be used to update firmware and drivers when the operating system on the server is up and running.

B.A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.

C.A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.

D.A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.

A.The Compute Module profile must have exactly two connections defined.

B.An upgrade license must be purchased and deployed.

C.Both FlexNlCs must be connected to the same network.

D.The sFlow option must be enabled and configured.

A.Fibre Channel connections can be defined

B.Enclosure Group Is automatically selected

C.UEFI optimized is the only available boot mode

D.Virtual WWNs and MAC addresses can be defined

A.network and storage connectivity.

B.NIC teaming setup at OS level.

C.IL0 IPv4 or IPv6 address.

D.local storage and BIOS settings.

E.partition layout for servers running Linux.

A.LACP on downlinks is configured for Ethernet connection

B.All connections within the server profile are using physical IDs

C.Ethernet connection is configured to boot from PXE

D.Storage array is connected directly to an HPE Synergy frame