Online Access Free HPE6-A44 Exam Questions

An administrator configures Unified Communications and Collaboration (UCC) heuristics mode on an Aruba
Mobility Master (MM). What should be modified in order to send items such as VoIP sessions and monitored
information about adds, updates, deletions, and periodic snapshots of those VoIP sessions on the MM or the
Aruba Mobility Controller (MC)?

• A.Mgmt Config profile
• B.Skype ALG Configuration profile
• C.OpenFlow Controller profile
• D.OpenFlow profile

An administrator implements a per-port tunneled node configuration for an Aruba Mobility Controller (MC)
that runs ArubaOS 8.x. The controller performs both MAC and 802.1X authentication.
What must the administrator specify on the controller to allow for 802.1X authentication to succeed?

• A.Enable L2 Authentication Fail Through in the AAA profile.
• B.Enable server roles in the AAA profile.
• C.Define MAC addresses in the local database for the 802.1X users.
• D.Define External RADIUS servers in the AAA profile.

An administrator migrates Aruba Mobility Controllers (MCs) from ArubaOS.6x to ArubaOS.8. x. In the 6.x.
configuration, the administrator configures GRE tunnels on the local controllers to a controller in the DMZ to
keep guest traffic off the corporate network. The problem with the solution is that is creates suboptimal routing
paths.
Which feature should the administrator implement to solve this problem?

• A.Clustering
• B.AirMatch
• C.Mobility
• D.MultiZone

What is true about Aruba controllers under normal operations in a Mobility Master (MM)-Mobility Controller
(MC) architecture?

• A.Any controller can perform local configurations.
• B.The Mobility Master can push a full configuration to a Mobility Controller.
• C.The APs can terminate on both Mobility Masters and Mobility Controllers.
• D.ARM must be used to optimize wireless performance.

An administrator mistakenly configures the wrong VLAN setting on a managed controller's interface. This
causes the controller to lose management access to the Mobility Master (MM).
Which mechanism will then attempt to restore the previous working configuration on the managed controller?

• A.restore config
• B.bulk configuration
• C.disaster recovery
• D.auto-rollback