Online Access Free HPE6-A46 Exam Questions

A company has a Unified Communications and Collaboration (UCC) solution.
* Users run softphones on their desktops and laptops.
* The UCC solution is configured to use a certain range of Layer 4 ports for VoIP traffic.
* The user devices connect to AOS-Switches.
A network administrator needs to configure the AOS-Switches to prioritize only the VoIP traffic. Where can the administrator configure a DSCP value to meet this goal?

• A.in a global UDP port-based QoS policy
• B.on the VLAN to which the user devices are assigned
• C.on the interfaces that connect to the user devices
• D.on the interfaces through which the VoIP traffic is forwarded

An administrator wants to ensure that an AOS-Switch forwards all traffic that it receives on interface 1 with high priority.
- Switches should also communicate the high priority to other switches across the traffic path.
- The switch has type of service disabled.
- The administrator plans to apply 802.1p priority 5 to interface 1.
What should the administrator check to ensure that the configuration will work properly?

• A.Interface 1 receives traffic with a tag.
• B.The forwarding path for the traffic uses VLAN tags.
• C.The AOS-Switch is configured to use eight queues.
• D.An 802.1p-to-DSCP map exists for priority 5.

An AOS-Switch runs IGMP on A VLAN.
What is a requirement for the switch to be a potential IGMP querier on that VLAN?

• A.The switch must have at least one IGMP group configured on it manually.
• B.The switch must run PIM-SM or PIM-DM on that VLAN.
• C.The switch must have an IP address on that VLAN.
• D.The switch must have IGMP fast leave disabled globally.

A customer wants to authenticate AOS-Switch managers to a RADIUS server. Managers should be assigned either read-only or full read-write level access based on the Service-Type VSA in their user account.
What must the network administrator enable on the AOS-Switches to ensure they comply with this plan?

• A.SNMPv3 and SNMPv3 restricted access.
• B.privileged-mode login authentication
• C.a manager and operator password
• D.RADIUS-based command authorization

Refer to the exhibit.

A network administrator applies the ACL shown in the exhibit. Which source IP address does the myList ACL deny?

• A.10.1.1.10
• B.10.2.1.10
• C.10.1.0.10
• D.10.1.2.10