Online Access Free HPE6-A66 Exam Questions

A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?

• A.LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
• B.LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
• C.LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
• D.LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)

A network architect is creating a new wired design for a warehouse building. As a best practice, what length should the architect allow for the service loop in the wiring closets in this environment?

• A.15-30 feet (5-10 m)
• B.30-60 feet (10-20 m)
• C.3 feet (1 m)
• D.3-10 feet (1-3 m)

A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?

• A.Minimum -70db. 1 AP per 5,000 square feet, high density design
• B.Minimum -65db, 1 AP per 2,500 square feet, high density design
• C.Minimum -80db, 1 AP per 1,000 square feet, very high-density design
• D.Minimum -70db, 1 AP per 2,500 square feet, capacity design

A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?

• A.AP power at 75% and a measurement of -90 dBM on the measuring device
• B.AP power at 75% and a measurement of -80 dBM on the measuring device
• C.AP power at 50% and a measurement of -65 dBM on the measuring device
• D.AP power at 100% and a measurement of -65 dBM on the measuring device

A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?

• A.2930F
• B.6300
• C.8400
• D.3810M