A.While APs are common, most clients are still docked and only require traditional wired connections with only the occasional dedicated PoE switch to provide power for the low number of devices needed.

B.Most older legacy switches had high port bandwidth utilization and were future proof designed to meet today's power-over-Ethernet needs.

C.Requirements for PoE are normally addressed using AC to DC power adapters. Concerns for port security for IoT devices are usually addressed using default wired encryption that all 802.3 Ethernet switches provide.

D.Clients tend to prefer wireless connections, raising the need for PoE port access. There is also a growing amount of IoT devices that require security and port authentication options.

A.1/1/8-1/1/10, 1/1/5-1/1/28

B.1/1/8, 1/1/10, 1/1/5-1/1/24

C.1/1/1-1/1/24

D.1/1/1-1/1/28

A.VSX is available on all Aruba OS-CX switches except the 6300F model.

B.VSX is ideal for Campus access layer deployments where ease of deployment is needed.

C.VSX is implemented on static port switches. VSX-plus needed to stack chassis together.

D.VSX allows upgrading members with near zero downtime or loss of packets.

E.VSX run separate control planes to reduce latency and improve performance.

A.multi-Layer refers specifically to using chassis switches with several line cards over stack port switches

B.has all the functionality of a Layer 2 switch and most of the functionality of a Layer 3 router

C.any switch that supports PoE, LLDP-MED and Flow Control

D.a switch with Layer 3 routing capabilities but lacks any Layer 1 features as a consequence

A.LAN

B.SD-WAN

C.WAN

D.Internet