A.Change the Core-1 management address to 10.1.1.1/25 first

B.Use the command ping 10.1.1.254 vrf mgmt

C.The destination 10.1.1.254 requires configuring a static route

D.Use the command ping 10.1.1.254/24

A.show vsf link

B.show vsf detail

C.show vsf topology

D.show vsf member

A.01001011

B.11010101

C.11111000

D.10110001

A.WAN/MPLS connectivity

B.Deep packet inspection

C.Endpoint Access

D.VPN access

E.Power over Ethernet

A.Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

B.Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

C.Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y

D.Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2