Online Access Free HPE6-A80 Exam Questions

Refer to the exhibit.

A museum wants to add full S02.11ax wireless coverage across the building, which is about 210 feet (64 m) by 330 feet (100 m). The museum has 15-foot (4.6 m) ceilings and stone interior walls. The network needs to support up to 600 wireless guest devices The exhibit also shows a preliminary plan tor AP locations, me museum has eight Ethernet drops in the lobby and girt stop, but has otherwise not been wired.
What is one recommendation that the architect should make to ensure a successful deployment?

• A.Add about 10 APs to achieve adequate density
• B.Add a wiring closet closer to the north side.
• C.Use at least CATS cable to connect to the APs.
• D.Use directional antennas to avoid lost signal.

A customer has a large network, which includes a main site and many branch sites. The network has a total of about 10.000 wireless devices at the main site and 15,000 wireless devices total at branches.
To fulfill the requirements for a wireless network upgrade, the architect plans to propose;
* 2 7205 MCs at the main site
* 2 7210 MCs at the main site
* 10 7030 MCs at branch sites
* 200 RAPs at branch sites
* 500 CAPS at the main site
* 300 CAPS at branch sites
What is the most cost-effective Mobility Master solution that meets the requirements'?

• A.MM-HW-5K appliance
• B.MM-HW-1K appliance
• C.MM-HW-1OK appliance
• D.MM-HW-5K appliance + MM-HW-5k appliance

Refer to the exhibit.

A customer has these availability requirements;
* loss of one controller with stateful failover and without impact on wireless client connectivity
* loss of one core switch without loss of connectivity for any endpoints or APs in the building
* loss of any one switch-lo-switch or MC-to-switch link without loss of connectivity for any endpoints or APS in the building and with minimal impact on infrastructure functionality
* loss of any one access switch with minimal impact to wireless client connectivity The exhibit shows the current plan for the topology.
Which change should the architect make to the plan to provide better support for the customers availability requirements?

• A.Add VLANs 11 and 15 to the MC connections to ensure both MCS can manage any of the APS.
• B.Use two 40GBE DACs between the core V3X switches for their switch links.
• C.Change the 40GbE DAC on the 8400 switch to a stacking cable with stacking module.
• D.Add 120 additional AP licenses, so that each MC can support ail the APs, even if the other MC fails.

For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

• A.The Aruba CX 630DM support up to 75W PoE+ per port
• B.The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
• C.The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
• D.The customer wants to utilize LACP on AP515 in VSF switch configuration.

Refer to the exhibit.


A customer needs a new branch office solution that:
provides 802.11ac wireless access to local resources and the local Internet connection connects wired and wireless users to resources at the main office in a secure manner The office has 200 users, who will the up to two wireless devices at the same time. The architect has determined that the office requires 10-13 AP-
515s. The customer wants to support a total bandwidth from an or me APS or about 2 cops.
The entire site is currently wired for CAT5e from a single wiring closet, which contains two access switches, a core switch, and the Internet cable modem, which has 10/10O/1OQO Mbps BASE-T ports. The wired networK will handle abouti Gbps of traffic. The switches do not support P0E/P0E+.
About 75 percent of all traffic is destined to the main office
The architect has looked up these specs for 7000 series controllers.
Which MC will meet the needs in the most cost-effective manner?

• A.7030
• B.7010
• C.7024
• D.7008