Online Access Free H11-811-ENU Exam Questions

When If4PSTN parameter is set to no, it means ().

• A.external users cannot make incoming calls through the PSTN
• B.internal calls within the virtual PBX cannot go to the PSTN
• C.outgoing calls are not allowed
• D.intra-office call control

Perform the following configurations on the U1960:
1. Create a number change rule by setting Number change index to 0, Change type to Change Number, Starting position to 0, Length to 4, and New number to 28560000.
2. Create another number change rule by setting Number change index to 1, Change type to Change Number, Starting position to 0, Length to 1, and New number to 17951.
3. Create a prefix by setting Prefix to 9f Service type to Basic service, Call property to Local call, Called number change to 0, and Calling number change to 1.
According to the preceding configurations, which of the following statements is CORRECT when user 7200 dials 933333333?

• A.The calling number is not changed.
• B.The calling number will be changed to 28560000.
• C.The calling number will be changed to 17951200.
• D.The called number will be changed to 1795133333333.

In U1900 configuration process, in which stage are the configurations for number change and call rights performed?

• A.Network mode configuration
• B.Office route configuration
• C.Office route selection code configuration
• D.Prefix configuration

The U1981 unified gateway provides a web management system to enable maintenance personnel to perform (). (Multiple Choice)

• A.signaling tracking
• B.board, user and trunk configuration
• C.board status and resource management
• D.device upgrade

A PBX consists of line circuits, repeaters, switch network, control system, and signaling devices. The switch network is used to ().

• A.Provide interfaces between switches.
• B.Enable connection between two users, between a user and a repeater, and between two repeaters.
• C.Coordinate devices to complete call processing and maintenance tasks.
• D.Receive and transmit signaling messages.
• E.Provide interfaces between switches and user phones.