H12-831_V1.0 Exam Question 41
On the network shown in the figure, IS-IS runs on R1, R2, R4, and R5, and the area ID is 49.0001. IS-IS runs on R3 and R6, and the area ID is 49.0002. The import-route isis level-2 into level-1 command is configured on R2 and R5. In AS 65000, R1, R3, R4, and R6 each establish IBGP peer relationships with R2 and R5. R2 and R5 are RRs, and R1, R4, R3, and R6 are clients. The IBGP peer relationships are established using Loopback0. The IP address of Loopback0 on each router is 10.0.X.X/32, and the router ID is 10.0.X.X, where X is the number of the router. R1 and R4 import the external route 192.168.1.0/24 to BGP through the import- route command, and R3 and R6 import the external route 192.168.2.0/24 to BGP through the import-route command. Which of the following statements are true?


H12-831_V1.0 Exam Question 42
On the network shown in the figure, VRRP is configured on Rl and R2, and the virtual IP address is
10.0.12.254. After the configuration is complete, the network engineer checks the VRRP status on R1 and R2, and finds that both devices are in the Master state. Which of the following is not a possible cause of this problem?

10.0.12.254. After the configuration is complete, the network engineer checks the VRRP status on R1 and R2, and finds that both devices are in the Master state. Which of the following is not a possible cause of this problem?

H12-831_V1.0 Exam Question 43
On the OSPFv3 network shown in the figure, area 1 is a totally stub area, area 2 is a common area, and area 3 is a totally NSSA. The IPv6 address of Loopback0 on R6 is 2000::6/128. The router ID of each router is 10.0.X.X, where X is the number of the router. When all links are normal, which of the following statements are true?


H12-831_V1.0 Exam Question 44
On the OSPF network shown in the figure, areas 1, 2, and 3 are common areas. The IP address of Loopback0 on R5 is 10.0.5.5/32 , and OSPF is enabled on the interface using the network command.
ACL 2000 (with the matching rule shown in the figure) is configured on all routers. If the command filter
2000 import is run in area 0 (where R1, R2, and R3 reside), which of the following routers do not have the route 10.0.5.5/32 in their routing tables?

ACL 2000 (with the matching rule shown in the figure) is configured on all routers. If the command filter
2000 import is run in area 0 (where R1, R2, and R3 reside), which of the following routers do not have the route 10.0.5.5/32 in their routing tables?

H12-831_V1.0 Exam Question 45
In the hub-spoke networking shown in the figure, to ensure correct route transmission , an administrator must manually configure the peer 10.1.2.1 _____ command in the IPv4 address family view of the BGP- VPN_out instance on the Hub-PE .

( Enter the answer in lowercase letters only. )

( Enter the answer in lowercase letters only. )
Premium Bundle
Newest H12-831_V1.0 Exam PDF Dumps shared by Actual4test.com for Helping Passing H12-831_V1.0 Exam! Actual4test.com now offer the updated H12-831_V1.0 exam dumps, the Actual4test.com H12-831_V1.0 exam questions have been updated and answers have been corrected get the latest Actual4test.com H12-831_V1.0 pdf dumps with Exam Engine here:
(246 Q&As Dumps, 30%OFF Special Discount: Freepdfdumps)
