End-to-end (E2E) network device update is required for the evolution from 5G Non-Stand-Alone (NSA) networking to Stand-Alone (SA) networking. In 5G NSA networking, the control plane functions are handled by the 4G LTE network, while the user plane functions are handled by the 5G NR network. In contrast, in 5G SA networking, the control plane and user plane functions are handled by the 5G NR network alone. So, to evolve from 5G NSA to 5G SA, all the network devices including Radio Access Network (RAN), Core Network (CN) and Transport Network (TN) need to be updated with 5G SA capable software and hardware.
It is important to note that 5G SA provides more flexibility, control and autonomy for network operation and management, However, it also requires a higher level of complexity and more resources to operate.

According to 5G eMBB service requirements, the minimum rate required for network edge coverage is 100Mbps.

"The RSRP value of the test terminal can be viewed on the GENEX Probe. A RSRP value of between -60dBm and -90dBm indicates good signal quality. Lower values indicate weaker signals, while higher values indicate stronger signals."

1. DM-RS (Demodulation Reference Signals) are transmitted in the frequency domain, they are used to demodulate the downlink data and control channels, and they can be used for cell measurement such as cell identification, cell reselection, and handover. B. CSI-RS (Channel State Information Reference Signals) are also transmitted in the frequency domain, they are used to provide channel state information for downlink data and control channels, and they can be used for cell measurement such as link adaptation, beamforming and interference management.
DM-RS stands for Demodulation Reference Signal and is used for channel estimation in the frequency domain. CSI-RS stands for Channel State Information Reference Signal and is used for channel estimation in the time-frequency domain. PT-RS and SSB are not channels (signals) that can be used for cell measurement in NR.