Online Access Free 000-106 Exam Questions

A system is being planned with three production partitions, one each for an IBM i, AIX standard edition, and Power Linux applications. One fibre-channel attached TS3100 tape library will be shared between the partitions for backup.Which solution provides tape library sharing with minimum operator intervention?

• A.Configure a fibre channel card for each partition, and a configure fibre switch.Connect the partitions and tape library to the switch.Zone the switch so all partitions can enable the tape when needed and disable the tape when finished.
• B.Configure AIX to control the tape library through one fibre channel adapter.Use AIX virtualization to host a virtual tape library connection to the IBM i and Linux partitions.Assign the library to the production partitions when needed.
• C.Configure VIO Server Express Edition to control the tape library through one fibre channel card.Assign the library to the production partitions when needed.
• D.Configure the IBM i partition to own the tape library.Use IBM i virtualization to host a virtual tape library connection to the AIX and Linux partition.Assign the library to the production partitions when needed.

Which of the following configuration is valid for expansion drawers on a Power 750 with 2 processor boards installed?

• A.2 PCI-e I/O drawers and 4 PCI-x I/O drawers
• B.3 PCI-e I/O drawers and 1 PCI-X I/O drawer
• C.4 PCI-e I/O drawers and 2 PCI-X I/O drawers
• D.4 PCI-e I/O drawers and 4 RIO-2 I/O drawers

A customer has shut down an LPAR after using DLPAR to add or remove processor and memory resources. When the partition is reactivated, the desired changes are missing.What action, or sequence of actions, will immediately and permanently solve this problem?

• A.Add or remove the resources using DLPAR, then shutdown and reactivate the LPAR.
• B.Add or remove the resources in the profile, click 'apply', then 'save'.
• C.Add or remove the resources using DLPAR and change the partition profile.
• D.Add or remove the resources in the system profile and reboot the managed system.

A customer is upgrading from a 16-core POWER6 570 with two enclosures to a 16-core Power 770 with only one enclosure. There are 22 PCI-X adapters and 19 PCIe adapters spread across the current CECs and I/O drawers.How many and what kind of drawers are needed to connect these adapters?

• A.3 PCI-X drawers and 4 PCIe drawers
• B.2 PCI-X drawers and 2 PCIe drawers
• C.4 PCI-X drawers and 3 PCIe drawers
• D.4 PCI-X drawers and 2 PCIe drawers

An HMC managed Power 720 with two partitions is being planned. One partition is production, the other is a test/development partition. Customer management requires the following:
Redundant LAN hardware for the production partition
Dual LAN interfaces
Automatic failover between the redundant physical LAN ports.
Which of the following meets the customer requirement?

• A.Order two PCIe dual-port LAN adapters. Use port 1 on each adapter for the production partition. Configure the test partition to use port 2 of each adapter.
• B.Include a PCIe dual-port LAN adapter in the production partition. Configure the production partition to use a port on the PCIe adapter and another on the Integrated Virtual Ethernet Adapter (IVE). Configure the test partition to use the IVE.
• C.Order two dual-port Integrated Virtual Ethernet Adapters (IVEs). Configure the production partition to use port 0 on each IVE. Configure the test partition to use port 1 on each IVE.
• D.Include a PCIe dual-port LAN adapter in the production partition. Configure the production partition to use one port on the PCIe adapter and another on the Integrated Virtual Ethernet Adapter (IVE). Configure the test partition to use the other PCIe adapter port.