Online Access Free C4040-109 Exam Questions

A customer has a VIO server which runs on internal disks. It can not support an outage during normal business hours. Which action can the administrator take that will support this requirement AND improve overall system availability?

• A.Use the -immed option when creating a hot spare disk.
• B.Use the -D flag when creating a backup device.
• C.Use the -defer option when mirroring the rootvg.
• D.Use the -P flag when setting disk quorum.

When planning for virtual disk redundancy on an AIX LPAR, which solution would provide the highest availability?

• A.N_Port ID Virtualization (NPIV)
• B.Distinct vhost provided for each disk allocated by the VIO Servers
• C.MPIO through redundant VIO Servers
• D.Disk mirroring on the VIO Servers providing the virtual disks

An administrator is attempting to configure a new deployment of 56 POWER7 Blades across 4 IBM BladeCenter H chassis. Each blade will be installed with an IVM and 2 LPARs.IVM is installed and the administrator checks that both LHEA ports are reporting a Link State of "Up." 2 LPARs are created and the network traffic balanced by allocating one LHEA port to the first LPAR, the second port to the other. After successfully installing the first LPAR via NIM, the administrator finds the second LPAR fails to netboot. What should the administrator verify on the BladeCenter Chassis?

• A.That the Multi-Core Scaling (MCS) attribute is correctly set on both LHEA ports.
• B.That a secondary I/O module has been installed and cabled.
• C.That 4 power supplies (PSU) have been installed.
• D.That both the external LHEA ports have been cabled.

An administrator has the following configuration on a VIO Server:

Why is this error being displayed?

• A.ent3 has no interface connected
• B.ent3 is controlled by the SEA
• C.ent3 is a LHEA port and requires the -L flag
• D.ent3 is configured as 'standard' instead of '802.3ad'

A Power Systems server has two HMCs connected to its Flexible Service Processor (FSP). It is decided to upgrade one of them to a later hardware version. The 7042-CR3 is disconnected and the new 7042-CR6 is connected in its place. The new HMC successfully discovers the managed server but some operations including DLPAR are failing.
Which action will allow the managed server and HMC to establish new RMC configurations?

• A.Use the "Reset Or Remove Connection" panel on the HM
• B.Run "/usr/sbin/rsct/install/bin/recfgct" in each LPAR.
• C.Reset the RMC connection in the Console menu option in ASMI
• D.Run "refresh -s IBM DRM" in each LPAR