Online Access Free C4040-221 Exam Questions

Which configuration will provide an LPAR maximum network resilience and performance with two Ethernet adapters?

• A.Configure EtherChannel using Internet Protocol over InfiniBand (IPoIB) with 64K TCP/IP MTU 64K Superpacket
• B.Configure EtherChannel with one Ethernet adapter as primary adapter & one as backup with hash mode roundrobin
• C.Configure both adapters with Quality of Server (QoS) adapters and configure virtual IP address on interfaces
• D.Configure both Ethernet adapters as IEEE 802.3ad link Aggregated with src_dst_port mode

What action does the following command perform for a new AIX hdisk, hdisk1 ?
chdev -I hdisk1 -a pv=yes

• A.Sets the physical volume identifier
• B.Changes the existing pvid on the disk to Yes'
• C.Clears volume group locks
• D.Resets the volume group descriptor area
• E.Makes the disk available for use

Given the following information, why is an error returned when trying to unmount the fitesystem /var/logs/tsm?

• A.The child filesystem /var/logs/tsm/livelog is still mounted.
• B.The umount command is being run while inside the filesystem.
• C.The filesystem is of type mount=true so cannot be unmounted while the system is running
• D.The hd8 is still tied to the filesystem.

Paging space on a system is almost entirely consumeD.What temporary solution can be used to prevent the system from sending SIGKILL to processes while the administrator performs more in-depth problem determination?

• A.Increase the existing paging space.
• B.Use tuning commands to set the page space kill threshold to 100%.
• C.Use tuning commands to change the system behavior so it does not terminate processes
• D.Use swapon to flush paging space entries to physical memory.

After performing a NIM rte install, the administrator noticed that not all filesets are at the correct Technology Level (TL). What action will help the administrator determine why the inconsistent fileset levels were installed?

• A.On the NIM server run the NIM IsIpp command to indentify downlevel filesets contained in the lpp_source.
• B.On the NIM client, run oslevel command against the TL to identify missing prerequisites.
• C.Run instfix command on NIM client to determine what filesets are inconsistent.
• D.On the NIM server, run an Ippchk to identify if the Software Vital Product Data is valid.