Explanation/Reference:
A Honey pot is a software application or system that pretends to be a normal server on the internet and it is not set up actively protect against all break-ins. In purpose, some of the updates, patches, or upgrades are missing.
You then monitor the honey pot to learn from the offensive side.
There are two types of honey pot:
High-interaction Honey pots - Essentially gives hacker a real environment to attack. High-interaction honey pots imitate the activities of the production systems that host a variety of services and, therefore, an attacker may be allowed a lot of services to waste his time. According to recent research into high- interaction honey pot technology, by employing virtual machines, multiple honey pots can be hosted on a single physical machine. Therefore, even if the honey pot is compromised, it can be restored more quickly.
In general, high-interaction honey pots provide more security by being difficult to detect, but they are highly expensive to maintain. If virtual machines are not available, one honey pot must be maintained for each physical computer, which can be exorbitantly expensive. Example: Honey net.
Low interaction - Emulate production environment and therefore, provide more limited information. Low- interaction honey pots simulate only the services frequently requested by attackers. Since they consume relatively few resources, multiple virtual machines can easily be hosted on one physical system, the virtual systems have a short response time, and less code is required, reducing the complexity of the virtual system's security. Example: Honeyed.
The following were incorrect answers:
Bastion host - On the Internet, a bastion host is the only host computer that a company allows to be addressed directly from the public network and that is designed to screen the rest of its network from security exposure. DMZ or Demilitarize Zone In computer networks, a DMZ (demilitarized zone) is a computer host or small network inserted as a "neutral zone" between a company's private network and the outside public network. It prevents outside users from getting direct access to a server that has company data. Dual Homed - Dual-homed or dual-homing can refer to either an Ethernet device that has more than one network interface, for redundancy purposes, or in firewall technology, dual-homed is one of the firewall architectures for implementing preventive security.
Dual-Homed - An example of dual-homed devices are enthusiast computing motherboards that incorporate dual Ethernet network interface cards or a firewall with two network interface cards. One facing the external network and one facing the internal network.
The following reference(s) were/was used to create this question:
CISA review manual 2014 Page number 348
http://searchsecurity.techtarget.com/definition/bastion-host http://searchsecurity.techtarget.com/definition/ DMZ
http://en.wikipedia.org/wiki/Honeypot_%28computing%29
http://en.wikipedia.org/wiki/Dual-homed

To ensure that the organization is complying with privacy issues, an IS auditor should address legal and regulatory requirements first. To comply with legal and regulatory requirements, organizations need to adopt the appropriate infrastructure. After understanding the legal and regulatory requirements, an IS auditor should evaluate organizational policies, standards and procedures to determine whether they adequately address the privacy requirements, and then review the adherence to these specific policies, standards and procedures.

Explanation/Reference:
Explanation:
To comply with regulatory requirements, the media should be reliable enough to ensure an organization's ability to recovery the data should they be required for any reason. Media price is a consideration, but should not be more important than the ability to provide the required reliability. Choices A and C are less critical than reliability.

Explanation/Reference:
Data Circuit Terminal Equipment (DCE) is a service provider device that does the actual data transmission and switching in the frame relay cloud.
For your exam you should know below information about WAN Technologies:
Point-to-point protocol
PPP (Point-to-Point Protocol) is a protocol for communication between two computers using a serial interface, typically a personal computer connected by phone line to a server. For example, your Internet server provider may provide you with a PPP connection so that the provider's server can respond to your requests, pass them on to the Internet, and forward your requested Internet responses back to you. PPP uses the Internet protocol (IP) (and is designed to handle others). It is sometimes considered a member of the TCP/IP suite of protocols. Relative to the Open Systems Interconnection (OSI) reference model, PPP provides layer 2 (data-link layer) service. Essentially, it packages your computer's TCP/IP packets and forwards them to the server where they can actually be put on the Internet.
PPP is a full-duplex protocol that can be used on various physical media, including twisted pair or fiber optic lines or satellite transmission. It uses a variation of High Speed Data Link Control (HDLC) for packet encapsulation.
PPP is usually preferred over the earlier de facto standard Serial Line Internet Protocol (SLIP) because it can handle synchronous as well as asynchronous communication. PPP can share a line with other users and it has error detection that SLIP lacks. Where a choice is possible, PPP is preferred.

Point-to-point protocol
X.25
X.25 is an ITU-T standard protocol suite for packet switched wide area network (WAN) communication.
X.25 is a packet switching technology which uses carrier switch to provide connectivity for many different networks.
Subscribers are charged based on amount of bandwidth they use. Data are divided into 128 bytes and encapsulated in High Level Data Link Control (HDLC).
X.25 works at network and data link layer of an OSI model.
X.25

Frame Relay
Works on a packet switching
Operates at data link layer of an OSI model
Companies that pay more to ensure that a higher level of bandwidth will always be available, pay a committed information rate or CIR
Two main types of equipments are used in Frame Relay
1. Data Terminal Equipment (DTE) - Usually a customer owned device that provides a connectivity between company's own network and the frame relay's network.
2. Data Circuit Terminal Equipment (DCE) - Service provider device that does the actual data transmission and switching in the frame relay cloud.
The Frame relay cloud is the collection of DCE that provides that provides switching and data communication functionality. Frame relay is any to any service.
Frame Relay
Integrated Service Digital Network
Enables data, voice and other types of traffic to travel over a medium in a digital manner previously used only for analog voice transmission.
Same copper telephone wire is used.
Provide digital point-to-point circuit switching medium
ISDN

Asynchronous Transfer Mode (ATM)
Uses Cell switching method
High speed network technology used for LAN, MAN and WAN
Like a frame relay it is connection oriented technology which creates and uses fixed channel Data are segmented into fixed size cell of 53 bytes
Some companies have replaces FDDI back-end with ATM
Asynchronous Transfer Mode

Multiprotocol Label Switching (MPLS)
Multiprotocol Label Switching (MPLS) is a standards-approved technology for speeding up network traffic flow and making it easier to manage. MPLS involves setting up a specific path for a given sequence of packets, identified by a label put in each packet, thus saving the time needed for a router to look up the address to the next node to forward the packet to. MPLS is called multiprotocol because it works with the Internet Protocol (IP), Asynchronous Transport Mode (ATM), and frame relay network protocols. With reference to the standard model for a network (the Open Systems Interconnection, or OSI model), MPLS allows most packets to be forwarded at the Layer 2 (switching) level rather than at the Layer 3 (routing) level. In addition to moving traffic faster overall, MPLS makes it easy to manage a network for quality of service (QoS). For these reasons, the technique is expected to be readily adopted as networks begin to carry more and different mixtures of traffic.
MPLS

The following answers are incorrect:
DTE - Data Terminal Equipment (DTE) is usually a customer owned device that provides a connectivity between company's own network and the frame relay's network.
DME - Not a valid frame relay technique
DLE - Not a valid frame relay technique
The following reference(s) were/was used to create this question:
CISA review manual 2014 page number 266