Online Access Free 70-741 Exam Questions

You are deploying a small network that has 30 client computers. The network uses the 192.168.1.0/24 address space. All computers obtain IP configurations from a DHCP server named Server1.
You install a server named Server2 that runs Windows Server 2016. Server2 has two network adapters named internal and Internet. Internet connects to an Internet service provider (ISP) and obtains the 131.107.0.10 IP address. Internal connects to the internal network and is configured to use the 192.168.1.250 IP address.
You need to provide Internet connectivity for the client computers.
What should you do?

• A.On Server1, stop the DHCP server. On the Internal network adapter on Server 2, enable Internet Connection Sharing (ICS).
• B.On Server2 run the New-NetNat -Name NAT1 -InternalIPInterfaceAddressPrefix 192.168.1.0/24 cmdlet. Configure Server1 to provide the 003 Router option of 131.107.0.10.
• C.On Server2, select the Internet and Internal network adapters and bridge the connections. From the DHCP console on Server1, authorize Server2.
• D.Install the Routing role service on Server2 and configure the NAT routing protocol. Configure Server1 to provide the 003 Router option of 192.168.1.250.

You have multiple servers that run Windows Server 2016 and are configured as VPN servers.
You deploy a server named NPS1 that has Network Policy Server (NPS) installed.
You need to configure NPS1 to accept authentication requests from the VPN servers.
What should you configure on NPS1?

• A.From Policies, add a connection request policy.
• B.From RADIUS Clients and Servers, add RADIUS clients.
• C.From RADIUS Clients and Servers, add a remote RADIUS server group.
• D.From Policies, add a network policy.

Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2016.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:\DHCPBackup.
What should you run?

• A.Set-DhcpServerDatabase
• B.dnscmd.exe
• C.Set-DhcpServerv4DnsSetting
• D.dism.exe
• E.dns.exe
• F.Set-DNSServerSetting
• G.Set-DhcpServerv6DnsSetting
• H.netsh.exe

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server 1. The network adapters on Server1 have single root I/O virtualization (SR-IOV) enabled.
Server1 hosts a virtual machine named VM1 that runs Windows Server 2016.
You need to identify whether SR-IOV is used by VM1.
Solution: On Server1, you open Hyper-V Manager and view the Integration Services settings of VM1.
Does this meet the goal?

• A.Yes
• B.No

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

You have the following subnets defined on Server1.

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution: From Windows PowerShell on Server1, you run the Add-DnsServerQueryResolutionPolicy cmdlet.
Does this meet the goal?

• A.Yes
• B.No