Online Access Free NACE.NACE-CIP2-001.v2025-02-25.q36 Practice Test (Page 6)

When performing inspection in accordance with ASTM D 4138 the Inspector will use:

A.A mechanical adhesion tester

B.A hardness tester

C.A set of 14 pencils of varying hardness

D.A destructive paint inspection Tooke gauge

Which product, is used in conjunction with other coatings such as FBE when the lines run through wetlands or a body of water?

A.Coal Tar Enamel

B.3-Layet Polyethylene (PE)

C.2-Layet Polyethylene (PE)

D.Concrete

Cold-applied tape

A.is typically green or led and looks like "painted" finish.

B.is polyethylene film, heat laminated, 'With an adhesive layer of butyl glue.

C.are identifiable by its distinct colors, usually light blue, green, Or Grey.

D.have a cross-linked polyethylene backing and a heat-activated adhesive.

When ASIN D 3363 is specified the Inspector must:

A.Use the correct solvent

B.Record the two end points identified in the standard

C.Record the highest value attained

D.Record the percentage of failure

The HATE adhesion tester uses

A.a hydraulic piston to apply pressure to the test dolly.

B.compressed air to apply pressure to the test dolly.

C.a special tape to apply pressure to the test dolly.

D.mechanical means only to apply pressure to the test dolly.

Other Version: 2510NACE.NACE-CIP2-001.v2022-06-01.q35; 48NACE.Examtorrent.NACE-CIP2-001.v2022-06-01.by.mark.35q.pdf; 2431NACE.NACE-CIP2-001.v2021-12-10.q33; 76NACE.Ipassleader.NACE-CIP2-001.v2021-09-08.by.elaine.35q.pdf

Latest Upload: 135Oracle.1D0-1057-25-D.v2026-06-03.q29; 270NAHQ.CPHQ.v2026-06-03.q396; 252CompTIA.220-1201.v2026-06-03.q196; 154GIAC.GCFE.v2026-06-03.q78; 148HIMSS.CPHIMS.v2026-06-03.q45; 231Google.Professional-Cloud-Architect.v2026-06-03.q165; 151HP.HPE7-A09.v2026-06-02.q48; 162ACDIS.CCDS-O.v2026-06-02.q56; 137Microsoft.AB-730.v2026-06-02.q31; 210ASQ.CSSBB.v2026-06-02.q130

Download PDF File