Online Access Free 4A0-C01 Exam Questions

How can a router ID be created on an Alcatel-Lucent 7750 SR router? Choose three answers

• A.By using the command "config router router-id X.X.X.X"
• B.From the least significant 32 bits of the chassis MAC address.
• C.From the loopback IP address.
• D.From the system IP address.
• E.From the highest interface IP address.
• F.From the most significant 32 bits of the chassis MAC address.

What needs to be configured before a SAP appears? (Choose 2)

• A.Ports are enabled by default, thus no need to use the no shutdown command.
• B.Enabling the port using the no shutdown command.
• C.Configuring the physical port in access mode.
• D.Configuring the physical port in network mode.

Which part of the NSAP address is used to indicate to the end system that a packet is to be processed by the router itself?

• A.NSEL
• B.IDI
• C.HO-DSP
• D.AFI

On an Alcatel-Lucent 7750 SR, what is the recommended approach for making sure that MTUs between a VPLS and its spoke IES termination match?

• A.Set the ip-mtu of the IES to match the service MTU of the VPLS.
• B.Set the MTU of the IES's network port to match the service MTU of the VPLS.
• C.Set the service MTU of the VPLS to match the IES MTU.
• D.Set the SDP MTU of the IES to match the SDP MTU of the VPLS.

What are the default settings for RSVP-TE on the Alcatel-Lucent 7750 SR?

• A.Per-interface label space, liberal retention mode
• B.Per-platform label space; liberal retention mode
• C.Per-interface label space, conservative retention mode
• D.Per-platform label space, conservative retention mode