Online Access Free PCA.CSDB.v2026-02-09.q72 Practice Test (Page 12)

A comprehensive dampness survey report should include:

A.Moisture meter readings only

B.Only photographs

C.Only recommendations

D.Building identification, history, construction details, diagnostic findings with locations marked on plans, and recommended actions

A flat roof cold deck specification requires ventilation to prevent condensation. BS 5250:2021 recommends minimum ventilation openings at:

A.5,000mm²/m at eaves; 2,500mm²/m at ridge

B.25,000mm²/m at eaves; 5,000mm²/m at ridge

C.10,000mm²/m at eaves; 10,000mm²/m at ridge

D.No ventilation; sealed completely

According to Building Regulations Approved Document C, what is the primary requirement for buildings below ground level?

A.Sound insulation

B.Thermal insulation only

C.Aesthetic protection only

D.Protection against moisture from the ground and from the atmosphere

Physical damp proof courses (such as slate or engineering bricks) are typically installed:

A.Never installed

B.After rising damp appears

C.During new construction or major renovation by removing defective courses and inserting new impermeable material

D.Only on roofs

Condensation typically appears as:

A.Tide marks with salt deposits

B.Brown staining on brickwork

C.Black mould on walls, ceilings, windows, and cold surfaces

D.Damp patches linked to external defects

Latest Upload: 148Pegasystems.PEGACPDC25V1.v2026-07-17.q45; 232CompTIA.N10-009.v2026-07-17.q230; 168EMC.D-PDM-DY-23.v2026-07-17.q66; 163Salesforce.ADM-201.v2026-07-17.q63; 400PMI.CAPM.v2026-07-17.q643; 166Cisco.300-215.v2026-07-17.q60; 436CollegeAdmission.PMHNP.v2026-07-17.q640; 226Microsoft.MB-240.v2026-07-17.q174; 140SAP.C_CE325_2601.v2026-07-17.q37; 292Microsoft.AZ-900.v2026-07-16.q224

Download PDF File