Online Access Free SMI300XS Exam Questions

Before disconnecting the cables from the NVMe backplane, you should map or take a picture of the cables to ensure they are returned to the same locations. True or False?

• A.False
• B.True

Once you remove the midplane lid from the AS-8125GS-TNMR2 system, how many total screws must be removed from the sides of the chassis in order to remove the midplane bracket?

• A.8 screws total (4 on each side of the chassis)
• B.6 screws total (3 on each side of the chassis)
• C.2 screws total (1 on each side of the chassis)
• D.4 screws total (2 on each side of the chassis)

When securing the PCIe tray, why must it be screwed in at one end of the chassis first before installing another tray at the opposite end?

• A.Because the tray will not function
• B.Because the tray will get pushed out
• C.Because the cables in the tray will get in the way
• D.Because the tray will break

Which two situations could occur if you forcefully shift the release lever without first unlocking the red lock?(Choose 2 answers.)

• A.All the answers are correct.
• B.The power supply unit will fail.
• C.The power supply unit can no longer be secured into the tray.
• D.You could permanently damage the lock on the power supply unit.

It is essential to connect the purple 5-volt power connector to the correct port to avoid damaging the AS-8125GS-TNMR2 system. True or False?

• A.False
• B.True