Online Access Free LEED-AP-ID-C Exam Questions

Which systems must be commissioned to earn Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification?

• A.Building Envelope
• B.Irrigation controls
• C.Fire suppression
• D.Daylighting controls

Design is underway for a new tenant suite with 4,000 ft2 (371.6 m2) of net occupiable area. The project build-out will include all new HVAC systems. Operable windows are installed as follows:
A total 75 ft2 (7.0 m2) located within 15 ft. (4.6 m) of all spaces
. A total 50 ft2 (4.6 m2) located within 25 ft. (7.6 m) of all spaces
Which design and documentation strategies must be used to demonstrate compliance with Indoor Environmental Quality Prerequisite, Minimum Indoor Air Quality Performance?

• A.Provide new mechanical outside air systems in compliance with ASHRAE 62.1-2010 and document compliance by tabulating rates in compliance with the standard
• B.Provide MERV 13 (F7) filters on the new HVAC system air handling units. No mechanical outside air systems required for space HVAC design
• C.Tabulate the total area of operable windows to indicate compliance. No mechanical outside air systems required for space HVAC design
• D.Install 25 ft2 (2.3 m2) of new operable windows within 25 ft. (7.6 m) of all spaces and tabulate the total area of operable windows to indicate compliance

Which of the following information is needed to document the non-structural elements that will be reused from the existing space in a LEED AP Interior Design and Construction project?

• A.Drawings indicating elements to be reused and a tracking spreadsheet
• B.A tracking spreadsheet and cut sheets
• C.Cut sheets and drawings indicating elements to be reused
• D.Elevations and space plans

A project's installed water fixtures do not exceed WaterSense maximum levels. Which compliance path should the LEED AP select under Water Efficiency Prerequisite, Indoor Water Use Reduction, and what type of documentation is required to demonstrate compliance with this path?

• A.Compliance Path 1: Prescriptive Achievement; product cutsheets
• B.Compliance Path 2: Usage-Based Calculation; indoor water use calculations
• C.Compliance Path 1: Prescriptive Achievement; indoor water use calculations
• D.Compliance Path 2. Usage-Based Calculation; prescriptive compliance confirmation

The Commissioning Authority (CxA) must report results, findings and recommendations directly to the

• A.owner
• B.contractor
• C.architect
• D.project manager