Explanation
The cost of commissioning (Cx) is often repaid with recovered energy performance. Commissioning is a process of verifying and documenting that a building and its systems meet the design intent and the owner's project requirements. Commissioning can help improve the energy efficiency, indoor environmental quality, and occupant satisfaction of a building. According to a study by Lawrence Berkeley National Laboratory, commissioning can result in median energy savings of 13% for existing buildings and 16% for new construction, with payback times of 1.1 years and 4.2 years, respectively1. Therefore, commissioning can be a cost-effective investment that pays off with reduced energy consumption and costs over the life cycle of a building. References: Building Commissioning: A Golden Opportunity for Reducing Energy Costs and Greenhouse Gas Emissions1; LEED v4 BD+C Reference Guide, Energy and Atmosphere, page 81

Explanation
A building that is located on a site without access to public transportation can have a high environmental impact associated with how the occupants get to and from the building, such as greenhouse gas emissions, air pollution, energy consumption, and traffic congestion. One of the strategies that a project team can implement in order to reduce this impact is to provide incentives for carpooling, which is a form of alternative transportation that involves sharing a vehicle with other passengers who have similar travel routes or destinations. Providing incentives for carpooling can encourage the occupants to reduce their single-occupancy vehicle trips and use fewer vehicles, which can save fuel, reduce emissions, and lower parking demand. Some examples of incentives for carpooling are: subsidies, vouchers, discounts, prizes, recognition, or preferential parking12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

Explanation
Recycling is a strategy that can be used to reduce the amount of construction waste that is sent to landfills or incinerators. Recycling involves collecting, sorting, processing, and reusing or selling materials that would otherwise be discarded as waste. Recycling can save natural resources, reduce greenhouse gas emissions, create jobs, and lower disposal costs1 . References: LEED v4 Green Associate Candidate Handbook1, EPA's Recycling Basics

Explanation
Graywater includes wastewater from lavatory faucets, whereas blackwater includes wastewater from toilets and urinals. This describes the difference between graywater and blackwater according to LEED. Graywater is wastewater that has been used for non-potable purposes, such as washing hands or dishes, but does not contain human or animal waste. Blackwater is wastewater that has been contaminated with human or animal waste from toilets or urinals. Graywater can be reused for certain purposes after minimal treatment, such as irrigation or toilet flushing, whereas blackwater requires more advanced treatment before reuse or disposal. The LEED Green Associate Candidate Handbook states that one of the strategies for achieving water efficiency is to "use non-potable water (graywater) for sewage conveyance" [1, p. 14]. References: LEED Green Associate Candidate Handbook, [Graywater vs Blackwater | U.S. Environmental Protection Agency]