impervious surfaces are those that do not allow water to infiltrate into the soil, such as asphalt, concrete, roofs, or compacted soil. Impervious surfaces increase the amount and speed of stormwater runoff, which can cause erosion, sedimentation, flooding, and pollution of downstream water bodies. Minimizing impervious surfaces can help reduce these negative impacts and preserve the aquatic habitat and natural stream morphology12.
Native vegetation is the plant life that is adapted to the local climate and soil conditions. Native vegetation can help filter pollutants, stabilize soils, reduce runoff, provide shade, and create habitat for wildlife. Enhancing native vegetation can help restore the natural functions and diversity of the ecosystem and protect the aquatic habitat and natural stream morphology13.
Rainwater is the precipitation that falls on the site. Rainwater can be captured and reused for various purposes, such as irrigation, toilet flushing, or cooling. Capturing and reusing rainwater can help reduce potable water demand, decrease stormwater runoff, and prevent flooding and pollution of downstream water bodies. Capturing and reusing rainwater can help conserve water resources and protect the aquatic habitat and natural stream morphology1 .
These strategies are consistent with the LEED v4 requirements for the Sustainable Sites credit category, which aims to protect and restore habitat, manage stormwater, reduce heat island effects, and promote alternative transportation.

The amount of landfill-destined waste generated during project construction can be reduced by requiring the general contractor to follow requirements for using dimensional construction materials, prefabrication or material efficient framing. These methods reduce the amount of material waste by minimizing cutting, fitting, and trimming on site, and by using standardized or modular components that can be easily reused or recycled.
The LEED Green Associate Candidate Handbook states that one of the strategies for achieving materials and resources efficiency is to "reduce construction waste through efficient framing techniques" [1, p.
15]. References: LEED Green Associate Candidate Handbook, [Reducing Construction Waste | U.S.
Environmental Protection Agency]

Utilizing an existing community nature path connecting the building to surrounding buildings is an action that promotes pedestrian access to a project site. Pedestrian access is the ability of people to walk to and from a project site safely and comfortably. A community nature path is a type of pedestrian infrastructure that provides a pleasant and scenic route for walking, as well as environmental benefits such as habitat creation, stormwater management, and heat island reduction. The other options are not actions that promote pedestrian access to a project site.Placing a low speed limit in the parking lot around the building is an action that enhances pedestrian safety within the project site, but does not improve pedestrian access to the project site.
Providing shuttle access between the project site and a local transit center is an action that encourages alternative transportation, but does not promote pedestrian access to the project site. Designating parking spaces closest to the building for exclusive use by carpooling vehicles is an action that reduces vehicle trips and emissions, but does not promote pedestrian access to the project site. References: LEED Green Associate Candidate Handbook, page 30; USGBC, [Location & Transportation], page 3.

LEED is a voluntary system, designed to complement and go beyond local building codes. It sets minimum sustainability benchmarks without overriding jurisdictional regulations.
"LEED does not replace building codes; it complements them by promoting green practices that can exceed minimum code requirements."
- LEED v4 BD+C Reference Guide, Introduction
#GBES LEED v4 Study Guide#

The cost of commissioning (Cx) is often repaid with recovered energy performance. Commissioning is a process of verifying and documenting that a building and its systems meet the design intent and the owner's project requirements. Commissioning can help improve the energy efficiency, indoor environmental quality, and occupant satisfaction of a building. According to a study by Lawrence Berkeley National Laboratory, commissioning can result in median energy savings of 13% for existing buildings and 16% for new construction, with payback times of 1.1 years and 4.2 years, respectively1. Therefore, commissioning can be acost-effective investment that pays off with reduced energy consumption and costs over the life cycle of a building. References: Building Commissioning: A Golden Opportunity for Reducing Energy Costs and Greenhouse Gas Emissions1; LEED v4 BD+C Reference Guide, Energy and Atmosphere, page 81