A.The VPRN ID must be the same value as is used in the vrf-target command

B.The VPRN ID must be the same value as is used in the route-distinguisher command

C.The router-id command should not be used in this context

D.The vrf-target command is mandatory

E.There is nothing wrong with this configuration

A.target:65100:2 and target:65100:3

B.target:65100:1 and target:65100:2

C.target:65100:1, target:65100:2 and target:65100:3

D.target:65100:1 and target:65100:3

A.The neighbor address should be 10.10.10.4 under the BGP configuration for successful VPRN operation.

B.The VPRN configuration on ASBR1 is correct.

C.The "family vpn-ipv4" command is required under the BGP configuration for successful VPRN operation.

D.The route-distinguisher value must be 64496:10 for successful VPRN operation.

E.An export policy is not required for successful VPRN operation.

A.Show router bgp routes prefix <prefix>

B.Show router bgp routes <prefix> self-originated

C.Show router bgp routes <prefix> hunt

D.Show router bgp routes

E.Show router bgp neighbor <neighbor ip> advertised-routes

A."Blue-Green"

B."Extranet-VPN-Blue"

C."Blue-Only"

D."Extranet-VPN-Blue" and "Extranet-VPN-Green"