A.It is not necessary to run MPLS at the boundary between autonomous systems.

B.Most routers that support VPRN functionality do not support model A by default.

C.It is the most scalable of the Inter-AS models.

D.VRF configuration is not required on the ASBRs.

A.Configuring iBGP between PE and CSC-CE within each customer carrier site; setting the address family to IPv4; and enabling the advertisement of labels for IPv4 routes.

B.Configuring MP-iBGP between PE1 and PE2; setting the address family to IPv4; and enabling the advertisement of labels for IPv4 routes.

C.Configuring eBGP between CSC-CE and CSC-PE routers; setting the address family to IPv4; and enabling the advertisement of labels for IPv4 routes.

D.Creating an export policy on CSC-CE1 and CSC-CE2 to advertise local PE addresses to the network provider.

A.To ensure uniqueness, Route Distinguishers are assigned by the IANA.

B.The Route Distinguisher is not used if the customer addresses do not overlap

C.The Route Distinguisher must have the same value as the Route Target.

D.It is an 8 byte value containing 3 fields

E.The Assigned Number field must contain a public IP address

F.The Administrator field contains either an AS number or an IP number

A.Each customer site has a logically direct route to every other customer site.

B.It provides optimal routing between all sites.

C.It allows access between all CE devices and all sites participating in the same VRF.

D.It requires a full BGP mesh in the provider core.

A.The routing protocol used must be the same as the routing protocol used at other CE-PE locations in the same VPN.

B.The protocol is configured under the global router context

C.A routing policy may or may not be required depending on the routing requirements and routing protocol

D.The interface leading to the PE is defined as a protocol neighbor

E.The protocol is configured under the config>service context