Scenario:
An architect proposes these products for a customer who wants a wireless and wired upgrade:
* Aruba 2930M switches at the access layer
* Aruba 5406R switches at the core
* Aruba AP-325s
* Aruba 7205 Mobility Controllers (MCs), deployed in a cluster
* Aruba Mobility Master (MM)
* Aruba ClearPass Cx000V
* Aruba AirWave
The architect also needs to propose a security plan for the solution. The customer has 900 employees and up to 30 guests a day. The customer wants to protect the internal perimeter of the network with authentication and simple access controls. The customer is most concerned about wireless security, but also wants to ensure that only trusted users connect on the wire. However, the customer also wants all wired traffic to be forwarded locally on access layer switches. The customer already has a third-party firewall that protects the data center.
The customer wants to use certificates to authenticate user devices, but is concerned about the complexity of deploying the solution. The architect should recommend a way to simplify. For the most part users connect company-issued laptops to the network. However, users can bring their own devices and connect them to the network. The customer does not know how many devices each user will connect, but expects about two or three per-user. DHCP logs indicate that the network supports a maximum of 2800 devices.
Refer to the provided scenario. Based on the plan for wired authentication, what is a correct plan for wired user VLANs?

An architect needs to plan a wireless deployment. The architect conducts a physical walkthrough, but still
needs more information. Which significant RF obstacle can be difficult to see visually and might require
access to blueprints?

An architect needs to choose between an Aruba Mobility Controller (MC) 7010 or 7024. Which customer need
indicates that the 7024 is a better choice than the 7010?

Refer to the exhibit.

A customer wants to replace the core and aggregation layer of an existing network. Currently the network routes between the aggregation layer and core, and uses the technologies shown in the exhibit.
The customer now wants to route at the core, instead of the aggregation layer, and extend some of the same VLANs in different buildings. However, the customer cannot eliminate the aggregation layer at this point. What should the architect recommend?

Refer to the exhibit.

A customer needs to upgrade the wireless network at their campus, which has a single large building.
Employees use the wireless network to access the Internet and centralized services. The building has four
floors.
These are the requirements:
* 30 APs on each floor
* A Mobility Master (MM)-based architecture
* Deployment of one Aruba 7030 Mobility Controller (MC) on each floor, with the MCs combined in a
cluster for seamless client failover and roaming
What should the architect explain to the customer about the proposed solution?