The Location and Transportation Credit, Bicycle Facilities, requires the project team to provide a vicinity map that shows the bicycle network, the route and the distance along the network to eligible destination(s) for all LEED Building Design and Construction projects. The vicinity map is a supporting material that demonstrates that the project site is within a 200-yard (180-meter) walking distance of a bicycle network that connects to at least one of the following: diverse uses, public transportation, recreation facilities, or schools1. The vicinity map must also show the scale and the north arrow, and indicate the project site and the eligible destination(s)2. The photographs of bicycle network signage and directional signposts, the photographs of the installed bicycle storage and shower facilities, and the manufacturer specifications for the chosen bicycle storage facilities are not required for the bicycle network, but for the bicycle storage and shower facilities.
Reference:
* LEED v4 Reference Guide for Building Design and Construction, Location and Transportation Credit: Bicycle Facilities, page 1281
* LEED v4.1 Bicycle Storage Requirements

To evaluate the Location and Transportation (LT) Credit: Reduced Parking Footprint, the project team should be aware of the minimum number of parking spaces required by the zoning code (D). This credit aims to reduce the environmental impact of parking by minimizing the number of spaces provided, encouraging alternative transportation methods. Knowledge of local parking minimums helps the team ensure compliance with LEED while avoiding excess parking, which can contribute to urban sprawl and the heat island effect. Design guidelines and building code standards are not directly relevant to this credit.

The credit may be achieved by using nonroof measures only, such as shading, paving, and vegetation, to reduce the heat island effect on the site. The credit does not require a highly reflective roof for all projects, but allows for flexibility and trade-offs depending on the climate and design conditions. The project can use the Heat Island Reduction 1 to demonstrate compliance with the credit requirements. The credit is feasible and applicable for this project, and does not need an alternative compliance path. Reference: SS Credit Heat Island Reduction, LEED v4 Reference Guide for Building Design and Construction234

This option requires the project to increase the breathing zone outdoor airflow by at least 20% above the minimum rates required by ASHRAE 62.1-2010. Therefore, the minimum design zone outdoor airflow is 0.120 CFM/ft2 x 1.2 = 0.144 CFM/ft2.

For Energy and Atmosphere Credit, Advanced Energy Metering, the minimum amount of time that the metering system should store data is 36 months. This is to ensure that the data can be used for long-term analysis and verification of energy performance1. The credit also requires that the metering system be capable of transmitting data to a remote location and reporting energy use at least hourly1. Reference: Advanced energy metering