The rail line station construction completion date is needed when determining whether the rail line station can contribute to Location and Transportation Credit, Access to Quality Transit. This is because the credit requires that the transit service must be existing or planned to be in operation within two years of the project's occupancy1. Discounted rail pass availability, connections to transfer routes, and passenger capacity are not relevant for this credit1.
Reference:
* Access to quality transit, p. 1

The renewable energy option is economically feasible if the present value of the utility cost savings over the lifetime of the system is greater than or equal to the present value of the higher initial cost of the system. This means that the system will pay for itself and generate net savings in the long run. The utility cost savings depend on the amount of energy produced by the solar thermal panel, the price of natural gas, and the inflation rate. The higher initial cost depends on the size, type, and installation of the solar thermal panel.
Reference:
Solar Thermal: Complete Guide to the Pros, Cons and Costs
Renewable Energy vs Natural Gas - How The Costs Stack Up
Is Solar Cheaper Than Natural Gas? - PowerSouth Energy Cooperative
LEED Reference Guide for Building Design and Construction v4

According to the LEED v4 Reference Guide for Building Design and Construction, the calculations for Quality Views must include the following variables: window size and configuration, glazing factor, window head height, distance of the window from the floor, permanent interior obstructions, and exterior obstructions. Ceiling heights, building furniture, and movable partitions are not required to be included in the calculations.
Reference:
LEED v4 Reference Guide for Building Design and Construction, Indoor Environmental Quality Credit: Quality Views, page 7061 Daylight and Quality Views

A vegetated shading structure is an example of a nonroof measure for Sustainable Sites Credit, Heat Island Reduction. The heat island effect is the phenomenon of urban areas having higher air temperatures than surrounding rural areas due to the absorption and emission of heat by human-made surfaces, such as buildings, roads, and pavements. The heat island effect can have negative impacts on the environment, human health, and energy consumption. One of the strategies to reduce the heat island effect is to use nonroof measures that provide shade, reflectivity, or evapotranspiration for at least 50% of the site hardscape, such as parking lots, walkways, plazas, and courtyards1. A vegetated shading structure is a type of nonroof measure that consists of a trellis or pergola that supports climbing plants or vines that provide shade and cooling for the underlying surface. A vegetated shading structure can also enhance the aesthetic and ecological value of the site2.
The other options are not examples of nonroof measures for Sustainable Sites Credit, Heat Island Reduction. A playground with artificial turf is not a nonroof measure, but a roof measure, as it is considered as part of the building envelope. Artificial turf is also not a compliant roof measure, as it does not meet the minimum solar reflectance index (SRI) or vegetated roof requirements1. A shade structure with a three-year aged SRI value of 0.2 is not a compliant nonroof measure, as it does not meet the minimum SRI value of 29 for nonroof surfaces1. A paving material with a three-year aged SRI value of 0.2 is also not a compliant nonroof measure, as it does not meet the minimum SRI value of 29 for nonroof surfaces1.
Reference:
* LEED v4 Reference Guide for Building Design and Construction, Sustainable Sites Credit: Heat Island Reduction, page 1281
* Heat Island Reduction | U.S. Green Building Council2

This strategy would qualify as an innovation credit because it is not addressed in the LEED green building rating system, and it achieves significant, measurable environmental performance by educating the students and the community about the benefits of green building. The project team would need to identify the intent, requirements, submittals, and design approach of this strategy in the Basis of Design document1. This strategy is also listed as an example of innovation in the LEED Innovation Catalog2.